The Wotofo Nudge RDA is a complementary bottom feeder RDA that suits the Wotofo Nudge squonk box perfectly. With a 24mm diameter and versatile center posts, the sky is the limit.
You have a 6mm juice well to stay saturated through long squonking sessions. A condensed chamber and domed top cap adorn the atomizer for great flavor throughout. Side airflow hits the coils in the sweet spot.
Wotofo Nudge RDA Features Include:
Triple post four terminal deck
Use an 810 or 510 drip tip
24K gold plated 510 connection
Includes BF pin, regular pin as well
6mm deep juice well
Top mounted screws (Phillips)
Floating center post
Staggered Z post terminals
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no ohm meter or knowledge of how to use an ohm meter, or when an ohm meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without working knowledge of electronics.
This is due to the fact that:
A rebuildable coil/wick MUST be tested carefully with an ohm meter before it is used.
If it is not tested it is entirely the risk of the user.
Wicks/coils WILL short circuit electronic devices if not installed properly and can cause batteries to vent and possibly explode. Be sure you are using the correct batteries with a mod and a rebuildable atomizer, such as a high amp continuous cell.
New coils should ideally be tested and then used first without wicks to ensure that they fire up and do not cause a short. This also helps burn off kanthal machine oil used during manufacture that helps with flavor. This is called “dry burning” and is an important element in building an atomizer.
No new coil/wick assembly should be used on an electronic device until known to be safe.
These items destroy electronic devices if not installed properly.
Please keep in mind all user battery safety when rebuilding. Use of rebuildable atomizers is at your own risk.
The SMOK TFV8 Big Baby is the newest generation in the Smok TFV8 line of tank atomizers. This top-fill tank with high-tech pre-built coils can take a staggering 100 watts or more and holds 5ml of juice.
The Light Edition features built-in LED lights that operate with your every vape.
Kanthal Wire 22 Gauge has a very low resistance rating and is suitable for very sub-ohm builds. This wire is hard to work with because of the thickness, but it is rewarding when your build produces huge vapor plumes!
Note: spool may vary.