The Tigertek Morphe RDA is a no-frills side-airflow rebuildable atomizer that is made for your single coil, squonker setup.
Whether you are a fan of bottom feeders or not, this is a great little single coil atomizer. Spring-style posts adorn the deck, which has room smack in the middle for your coil. Includes a BF squonker pin as well as regular 510 pin.
Tigertek Morphe RDA Features Include:
Simple, single coil deck
Use an 810 or 510 drip tip
SS 510 connection threading
Includes BF and regular 510 pin
Springs hold your build on the posts while you fine-tune the coil
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no ohm meter or knowledge of how to use an ohm meter, or when an ohm meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without working knowledge of electronics.
This is due to the fact that:
A rebuildable coil/wick MUST be tested carefully with an ohm meter before it is used.
If it is not tested it is entirely the risk of the user.
Wicks/coils WILL short circuit electronic devices if not installed properly and can cause batteries to vent and possibly explode. Be sure you are using the correct batteries with a mod and a rebuildable atomizer, such as a high amp continuous cell.
New coils should ideally be tested and then used first without wicks to ensure that they fire up and do not cause a short. This also helps burn off kanthal machine oil used during manufacture that helps with flavor. This is called “dry burning” and is an important element in building an atomizer.
No new coil/wick assembly should be used on an electronic device until known to be safe.
These items destroy electronic devices if not installed properly.
Please keep in mind all user battery safety when rebuilding. Use of rebuildable atomizers is at your own risk.