FREE SHIPPING TO USA FOR ALL ORDERS OVER $50 | ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)
FREE U.S. SHIPPING ON ALL ORDERS OVER $50
ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

Smok M80 Plus

Smok M80 Plus

Smok M80 Plus

$59.99

4.38 out of 5
8 Reviews
All in stock items ship within 24 hours (excluding weekends and holidays).

Rated 4.38 out of 5 based on 8 customer ratings
(13 customer reviews)

The Smok M80 Plus comes from the XPro line. The M80 Plus boasts a wider range of temperature control than current chips on the market. The range is 100-600 degrees Fahrenheit. You can use nickel wire builds or a coil head with nickel wire like Kanger’s Ni200 OCC coils. The chip will read out and allow you to control the temperature of the build. Using regular Kanthal reverts the chipset back to displaying voltage.

Clear selection

Save on Complex Coils and Wire

Save on Wick

SKU: 27696 Category: Tags: , , , , , , , , ,
0000

Smok M80 Plus is a phenomenal temperature control mod. It has the ability to switch between three settings. The three mods are temperature, mechanical, and variable wattage. the Smok M80 has given the pricey DNA40 chipset a run for its money. This competitively-priced temperature control mod is a great buy because of Smok’s reputation as a quality company. Smok has always been more QC-heavy than its competitors. The sensor on this unit controls temperature from 100-600 degrees. Comes with one Smok M80 and a mini USB charging cord. Imported.

Smok M80 Plus Features Include:

  • Built in 4400mAh battery capacity.
  • 2 LiPo packs.
  • Fully pass-through capable.
  • Reads resistance down to 0.1Ω.
  • Mini USB charge port.
  • Mechanical mode – chipset is bypassed.
  • Regulated/variable mode.
  • Variable wattage: 6w-80w in 0.1 increments.
  • Temperature control for nickel builds.
    • 100°F-600°F
  • Maximum amperage output: 20A.
  • Maximum voltage output: 12V.
  • Reads resistance down to 0.1Ω.
  • Reads resistance up to 3.0Ω.
  • Dimensions: 85mm x 55mm x 22mm.

Temperature readout issue has been corrected in this version. Time delay sensor has been corrected in this version. Firmware has been updated (V6).

Additional information

Weight 12 oz
Color

Black, Silver, Grey

Manufacturer

Share your thoughts!

4.38 out of 5 stars

13 reviews

Let us know what you think...

What others are saying

  1. givesuhe11

    4 out of 5

    Don’t know if OriginVape will read this but the description is wrong, it will read resistance down to .1ohm. Also it might help to say that the 4400mah is from two LIPO batteries… And the upgrade that you can do yourself from v0004 to v0005 is the fix to the delay problem… But what hasn’t been fixed is the temp reading… when it says 420f it is really 520f… a 100 degree discrepancy… I have done the cotton burn test in 10 degree increments down to 340f and with a laser temp sensor it’s really 440f, and the cotton does not burn then… When set to 420f the laser sensor reads 520f

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      Thanks for bringing that up! The description was edited to include the correct info. Also, Smok wanted to thank you for your help with their bug. The engineers have read this statement and will incorporate the the information into the mod. Smok assured us that the new one will not have such a discrepancy.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Logan

    4 out of 5 SMOK Xpro M80

    I have the original that doesn’t fire above 3v anymore. I’ve contacted the seller. My question is will the V2 have this problem fixed and will it cost the same so I can exchange for that one? I LOVE the feel in hand but if it isn’t fixed I will have to find another MOD to use.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      Logan,

      Unfortunately we are not certain as to the policies of Smok nor the original vendor with whom you made the purchase! We appreciate your comment and hope the seller helps you!

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. ryan

    v2

    So with all the videos and people complaining this doesn’t pass a cotton burn test. Is this new update fix that or something. I see you say they addressed the temp sensing so its accurate and you mention other upgrades. I see nothing official from smok but I presume they are letting vendors know. Thanks

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      Yes. These were revised and the issues prevalent were alleviated!

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. t.james123abc

    5 out of 5

    literally as soon as this thing became available to buy i had one on the way, and man this thing is amazing, the built in battery life is unbelievable even at a constant 80 watts!! charges via USB which is convenient, has a temperature control that is a neat feature, shows date and time when locked, and can even be used as a mech mod in a mode!!! wild!! absolutely love this thing already, hope they stay in stock so i can get another sometimes soon! great job originvape, fast shipping and great products.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Maxwell

    5 out of 5

    I just received this device after looking for the perfect device. From what I’ve been reading it may have its issues. I have not experience any. So far I am very happy with my purchase 4 stars for the product only because the interface is more complicated then I’m used too. That being said I give five stars, would give many more if I could, to origin for their stellar customer service. All questions asked were answered promptly and politely by Eric. The receipt I received with my device even came with a hand written thank you, fast shipping, and the feeling of a neighborhood store on the web across state lines. Truly a hone run as far as service is concerned. Will absolutely be a long time loyal customer from now on.
    Thank you Eric for all of your,and your teams hard work.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Nicholas

    5 out of 5

    I love this mod, this is my second one. The first run version I had saw some voltage issues none of which are present on the version 6 from Origin. I primarily bought this device because of the long battery life and max wattage. The battery lasts over a day and a half, it’s nice to not swap out batteries every 4 hours. I have not tried the temperature mode so I cannot speak about it. For those wondering why they would need high wattage it is great to be able to use a single device for a 1.2 ohm tank at 15 watts and then toss on a .3 rba at 60 watts. Awesome service and price, thanks.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Daniel

    2 out of 5

    I give 2 stars because I cant even use it. I received a defective one. it wont read any tanks I have with the ohms .3 or .5. It will read the tanks if I partially screw them on but then I have a loose wobbly tank so either theres something wrong with the spring pin or the threads are not right. very bummed. otherwise nice looking mod good weight I got the silver but wish I went for the grey.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      RMA was sent out! This mod will be replaced via our 7-day return policy

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. jrush800

    5 out of 5 Very nice!

    Smooth vape.. great design. Temp control even works with Kanthal. Never get a dry hit. Very satisfied. And fast shipping!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Miguel

    5 out of 5 Great 80w mod

    Disregarding the temp control issues, the build quality and feel is far superior to the istick 50w and overall i feel that it outperforms it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. joseph dilucca

    Question

    my smok was accidentally put in the washer and i dried everything but its still off and will not take a charger should i leave it on the charger and hopefully it will turn on or am i wasting my time

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      Unfortunately, it would appear this mod is done for. I would strongly advise you not to use it any more, since the circuitry inside is definitely sensitive to water damage.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up