Pioneer4You iPV D3 Single Battery Vape Mod
With a Yihi SX-150H chip with a fully redesigned exterior, this single-battery device is a terrific mod.
Pioneer4You IPV D3 is a single-battery powered temperature control device by P4U. This device takes popular IPV D2 to another level, with more wattage, a better screen, and redesigned housing with a small battery door. The IPV D3 utilizes the newest Yihi SX150H chip.
The IPV D3 is the same shape and size as the D2, with more functionality. The tactile button stays but the exterior and many of the internals are redesigned.
This device handles up to 80 watts, or 75 Joules in TC mode, with a max output of 4.5 volts. There are two modes: power mode for Kanthal, and Joule mode for titanium and nickel wire. Safety features include high input voltage warning, overheat protection, low resistance warning, output short circuit protection and reverse battery cutoff.
Included in each order is an IPV D3 mod, USB charging cord, instruction manual, and warranty card. Unlike the IPV D2, the IPV D3 does not include a silicone sleeve. Imported.
Pioneer4You IPV D3 Features Include:
- Built by Pioneer4You
- Power output: 7W – 80W
- Joule output: 10J – 75J
- Reads resistance in power mode from 0.15 to 3.0 ohms
- Reads resistance in joule mode from 0.05 to 5.0 ohms
- Voltage output: 1V – 7V
- Input voltage: 3.2V – 4.5V
- Input current: 1.3A – 35.oA
- Temp limit in Celsius: 100 – 300 Celsius
- Temp limit in Fahrenheit: 212 – 572 Fahrenheit
- Chipset: Yihi SX150H
Check out Mike Vapes review on this mod:
If you have questions about the step-down capability, here it is tested out:
Black, Blue, Silver, White