FREE SHIPPING TO USA FOR ALL ORDERS OVER $50 | ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)
FREE U.S. SHIPPING ON ALL ORDERS OVER $50
ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

Lost Vape Efusion Mini DNA200 Natural Wood Edition

Lost Vape Efusion Mini DNA200 Natural Wood Edition

Lost Vape Efusion Mini DNA200 Natural Wood Edition

$159.99

All in stock items ship within 24 hours (excluding weekends and holidays).

Lost Vape Efusion Mini DNA200. This little mod will fit comfortably in your pocket, pack a wallop, and look awesome from any angle with natural dark and light wood side panels.

Note: Wood veneer panels may not be flush with mod. Edges may stick out. Carbon fiber panels are included.

Clear selection

Save on Complex Coils and Wire

Save on Wick

SKU: 56487 Category: Tags: , , , , , ,
0000

Real wood panels on your mod give this device the ultimate upscale look.

This limited edition mod from Lost Vape has Evolv’s DNA200 chip for a robust, powerful vape, and awesome side panels made out of dark or light wood. Also enclosed with each mod is a set of black carbon fiber panels, should you want to change the look of your device.

The Efusion Mini DNA200 packs a punch and yet has a comfortable form factor to fit easily in your pocket.

A high quality 900mAh Fullymax LiPo battery is expertly tucked inside the mod, removable and chargeable via a rapid charger or the micro USB port on the front face.

Why would you want the Efusion mini DNA200? The form factor is one reason, at only 50mm x 90mm x 26mm. The body is cast from aluminium is a pocket friendly design that most vapers would appreciate.

The dark and light wood panels are hand-carved and no two mods look alike. Natural wood contracts and expands with temperature and moisture changes, and each panel is adhered to the mod by hand. The wood panel is adhered to the mod using a special adhesive that leaves no residue when removed. You can switch out the wood panels for the enclosed carbon fiber panels. You may not be able to reuse the wood panels once you remove them.

Please note: No two mods are alike due to the handmade nature of the device. Color variations may occur. Warping wood is a natural process, due to temperature and moisture variations. Wood panel edges may not be flush with the mod. Plastic packaging may have imperfections.

Lost Vape Efusion Mini DNA200 Natural Wood Features Include:

  • Powered by Evolv DNA200 temperature protection board
  • Natural wood panels made with real wood
  • Black Carbon fiber panels also included with each order
  • Evolv’s Escribe software, dial in your perfect vape with over 93 options
  • User serviceable 900mAh 10 watt hour 11.1V 3 cell FullyMax lithium polymer battery
  • XT30 connector for maximum compatibility and user serviceability
  • Ball bearing sliding cover for easy access to battery compartment
  • Firmware upgradeable
  • Temperature Limit: 200°F – 600°F
  • Output Power: 1Watt – 200Watts
  • Supports resistance down to .05Ω
  • Uses Kanthal, Ni200 (Nickel), SS (Stainless Steel) and Ti (Titanium)
  • Dial in your own temperature coefficient of resistance via Escribe
  • Precision CNC machined of 6063-T6 aluminum body
  • Polished and bright dip anodized gloss finish
  • Stainless steel 510 atomizer connector
  • Ultra responsive custom milled stainless steel buttons
  • Spring loaded nickel plated brass center pin
  • Integrated 1 amp micro-USB on-board balanced charger (cord included)
  • Cell-by-cell monitoring
  • Pass-thru charging functionality
  • Dimensions: 90mm*50mm*26mm
  • Designed and Manufactured by Lost Vape
  • 6-Month manufacturer’s warranty
  • 1-Year Limited Warranty for DNA200 chipset through Evolv Technologies

Additional information

Weight 12 oz
Manufacturer

Wood Grain

Light Wood Silver, Dark Wood Silver, Light Wood Black, Dark Wood Black

Share your thoughts!

Let us know what you think...

What others are saying

  1. Brian

    Question

    Is this in stock right now

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      yes it is =)

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Glass

    Question

    From what I gather, the wood panels are just veneers. Are these pre-attached, or do you have to remove the carbon fiber stickers and put the veneers on yourself?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • originvape

      Hi! The panels are pre-attached and need to be removed to get the CF on there.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Kyle

    Question

    Do you guys carry any drip tips that will match the wood on the silver and dark wood version?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • One person found this helpful
      originvape

      Lost Vape is working on it, they promised us! =)

      (1) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Anonymous

    Question

    HI, I’ve been searching for awhile now and i cannot seem to find extra wood panels nor extra batteries for the efusion mini. will you have them in stock soon or is there somewhere you could recommend?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up