FREE SHIPPING TO USA FOR ALL ORDERS OVER $50 | ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)
FREE U.S. SHIPPING ON ALL ORDERS OVER $50
ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

Joyetech Cuboid 150W TC

Joyetech Cuboid 150W TC

Joyetech Cuboid 150W TC

$34.99$36.99

4.00 out of 5
3 Reviews
All in stock items ship within 24 hours (excluding weekends and holidays).

Rated 4.00 out of 5 based on 3 customer ratings
(2 customer reviews)

The Joyetech Cuboid 150w is a robust and durable mod that offers vapers the full range. With an adjustable temperature coefficient of resistance, the possibilities are endless.

Please note: current stock of grey is a lighter shade than that shown in product photos.

Clear selection

Save on Batteries

Save on Complex Coils and Wire

Save on Wick

SKU: 52151 Category: Tags: , , , , , ,
0000

The Joyetech Cuboid 150w is a dual-18650 device with an easily adjustable temperature coefficient of resistance. This allows you to use any wire you please for temperature control. All that is needed is the coefficient, which is pre-loaded for many wires onto the onboard memory of the device.

The Cuboid’s 150w top end offers ample power for any build, with almost an inch tall OLED screen in easy to read white on black. You can also adjust the the wattage down to 1 watt. The screen has an indicator for two batteries, instead of the usual one on other box mods. Three colors are being produced, black silver and grey. Batteries are removable and sold separately, 20 amp continuous or higher rated batteries recommended. Charge your batteries outside the mod for a better charge. Each order includes one Joyetech Cuboid mod, a USB data cord, a manual and warranty card. Imported.

Firmware is upgradeable for this device, the 200w upgrade can be found here.

Joyetech Cuboid 150w Features Include:

  • Built by Joyetech
  • Temp range: 200F – 600F
  • Reads resistance from 0.05 to 1.5 ohm in temperature mode
  • Reads resistance from 0.1 to 3.5 ohm in wattage mode
  • Dual 18650 mod (2x 18650 batteries sold separately)
  • Firmware upgradeable via micro USB port
  • Note: Screen protector in place. Screen is not scratched.
  • Note: Some firing buttons may experience rattling
  • Same 0.96″ OLED interface as eVic-VTC
  • Dual battery life indicators
  • Durable and sleek zinc alloy finish
  • Dimensions: 3 5/8″ x 1 5/8″ x 1 1/8″

Additional information

Weight 14 oz
Manufacturer

Color

Black, Silver, Light Grey

Share your thoughts!

4 out of 5 stars

2 reviews

Let us know what you think...

What others are saying

  1. Philip Floyd

    5 out of 5 Great vape fantastic price

    Got this in today and it’s wonderful. Reads everything very nice, no rattles whatsoever on the device, and the upgrade to 200 watts took no time at all.

    Very fast shipping and great service from origin vape as well. Would reccomend this to any intermediate caper ready for temp control

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. cle.paolo

    In VW mode, with firmware 3.0 it’s not accurate, i.e. my coil si 1,5ohm but it reads 1.75ohm, but works fine. After upgrade to firmware 3.10, my coil at 1.5ohm was read by Cboid as 2.4ohm! So, I have downgrade back to firmware 3.0.
    As I was saying, the build is decent considered the price. My model has the lightly crooked display
    Regards

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • cle.paolo

      UPDATE 2: After I have removed the batteries Cuboid works with Cubis. However, the metering issue remains.

      Regards

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • cle.paolo

      [img]http://imgur.com/bClKgI2[/img]
      [img]http://imgur.com/68lbn1o[/img]
      [img]http://imgur.com/n6mX3uH[/img]
      [img]http://imgur.com/zVcvagL/[img]

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • cle.paolo

      UPDATE:
      In VW(power)mode doesn’t works with original Cubis(from Joyetech) and 1 ohm coil. I’ll have to investigate. However, 1 ohm coil works fine with my old Cloupor Mini. Please, see the picture below:

      http://imgur.com/bClKgI2
      http://imgur.com/68lbn1o
      http://imgur.com/n6mX3uH
      http://imgur.com/zVcvagL

      Here the album(in case the links above doesn’t works): http://imgur.com/a/oEbIk

      I think that Cuboid is a very cheap big battery, but esthetically is beautiful!

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. VapeNMirrors

    5 out of 5 Almost prefect

    No metering issues here. Very smooth tc operation even with 316 SS. No balance charging and heavy weight are only cons. Excellent ergonomics and build on mine.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • cle.paolo

      Hi, very strange because I have tried four Cuboid(silver, grey and two black) and all of them have te same metering issue in VW(power) mode. Please, see the photo above in my previous comment(updated, another bug).

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up