FREE SHIPPING TO USA ON ALL ORDERS OVER $50 | ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)
FREE U.S. SHIPPING ON ALL ORDERS OVER $50*
ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

Infinite CLT V3 Mini RDA in Stainless Steel

Infinite CLT V3 Mini RDA in Stainless Steel

Infinite CLT V3 Mini RDA in Stainless Steel

$29.99

4.67 out of 5
3 Reviews
All in stock items ship within 24 hours (excluding weekends and holidays).

Rated 4.67 out of 5 based on 3 customer ratings
(3 customer reviews)

The Infinite CLT V3 Mini RDA is the same size as the mini freakshow and almost as small as the Derringer. This authentic mini rebuildable looks terrific!

Out of stock

0000

The Infinite CLT V3 Mini RDA is the newest mini atomizer by Infinite/Sparkle. Infinite jumps on the mini rebuildable bandwagon with the CLT V3 Mini.

It features the awesome glass chuff lip that was a prevalent feature on the CLT V3. This model has a PEEK airflow disc, similar to the Bullet by Sparkle. Crafted out of stainless steel, this atomizer is well-built.

It has an adjustable copper 510 screw and three Delrin drip tip adapter pieces to fully customize your vaping experience. It also has similar airflow to the CLT V3 with three milled slits on each side of the barrel, both adjustable.

A notable upgrade from the former incarnation are the bigger slits in the center posts. This helps the atomizer accommodate lower gauge wire. There is a PEEK insulator on the positive post. The center post is significantly larger than the negative posts. The negative posts come milled into the deck, a good practice to prevent loose posts.

Included is one Infinite CLT V3 Mini RDA, three Delrin drip tip adapters, and replacement o-rings and screws. Imported.

Infinite CLT V3 Mini RDA Features Include:

  • Machined in solid stainless steel
  • Built by Infinite, also known as Sparkle Tech
  • 22mm diameter
  • Three-post setup with large slits for lower gauge builds
  • Authentic, not a clone!
  • copper adjustable 510 screw
  • PEEK disc for directing internal airflow
  • Wide-rim glass chuff tip
  • 22.5 MM height without drip tip

See more of Hank Vapes reviews here.

Additional information

Weight 4 oz

Share your thoughts!

4.67 out of 5 stars

3 reviews

Let us know what you think...

What others are saying

  1. One person found this helpful
    Lucius

    5 out of 5 Best Mini RDA to date!

    Great flavor & clouds. The glass drip tip is a must have! The air flow is oustanding. It also hold many of my favorite builds due to the large post holes. I definitely recommend this one.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. One person found this helpful
    Eduardo

    4 out of 5 Almost the best of the "Attack of the mini RDA's"

    Has every option you could want. So It’s a great lil RDA I will focus more on cons simply because except those has all pros.
    Cons:
    O-ring . The Single O-ring on base . Prone to leaking from base especially if you over-saturate
    O-ring on top part of sleeve that controls AFC has same tolerance as base.: only easily adjustable with drip tip adapter fit snug.
    Can’t use spit back and 510 drip tip adapter simultaneously
    Both chuff caps to loose to adjust AFC or pop top to drip

    Pros:
    Leads don’t back out or clip wire. major +++
    works excellent in standard drip tip higher ohm and slightly closed of (top slot)
    works just as great 5 star in non adjustable , wide open, Chuff, low to super sub ohm Cloud Chasing mode

    In either mode don’t over saturate or use to much length in tail end of wick that tucks under or it will e-juice will lubricate single o-ring on base and leak problems.

    Bottom Line

    Great bang for buck if in market for mini RDA if none of cons are deal breaker

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Eduardo

      My name is not Eduardo , but sure why not .lol . pad pic quality just wanted to show size and looks on a small device 🙂

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. One person found this helpful
    Eduardo

    Pyrex Chuff on large box mod (cloud chasing)

    On Snowwolf 200 w, max vg juice and cotton

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. One person found this helpful
    Eduardo

    Quick Build on deck

    In flavor mode, Excuse sloppy coils. Not center post on purpose. In Fully open cloud chasing mode I recommend center posting

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Hank

    5 out of 5 Sleek!

    This RDA is great! Great flavor, easy to build, fantastic airflow and airflow control. The glass drip tip is amazingly comfortable and the delrin drip tip does not get hot.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. nafunu

    Question

    Once you’ve put on the plastic “beauty” ring to hide the attachment for the wide mouth drip tips how do you remove it? Ive tried everything I can think of except prying it off.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up