eVic VTC Mini 60W by Joyetech
The eVic VTC Mini 60W is a single-battery powered temperature control mod that takes all that was good about the eVic VT and adds more user feedback. A single 18650 battery is required, sold separately.
The eVic VTC Mini from Joyetech is the revised version of the eVic VT box mod. This mod requires a 18650, a big difference over the LiPo packs found in the earlier device. It also has a cutting-edge chip set and a baked enamel paint job, this baby ticks all the boxes.
Joyetech is a heavy hitter in the vaping industry. They have produced a laundry list of mods stretching back to the early days of vaping. As always with Joyetech, expect quality and innovation.
Joyetech has rolled out titanium coil heads (CL-Ti) for use with this mod. The titanium coil heads are for temperature sensing only. This new device goes up to 60 watts and will come in three awesome race-inspired colors. The three gorgeous colors are black, white and cyan. The OLED screen is black with a white readout, making it easier to see the screen on sunny days.
The mod can read resistance below .01 ohms in VT-Ni and VT-Ti modes. In variable wattage mode, this latest Joyetech product will register 0.15 or above resistances.
The eVic VTC Mini 60W kit includes: an eVic VTC Mini 60W mod, an eGo One Mega Tank, one CL-Ni 0.2 ohm head, and one CL-Ti 0.4 ohm head. Also included is a mini USB charging cable and a wall adapter. Imported.
Joyetech have also integrated into this device quite a bit of research and development in juice consumption economy. They have found ways to make this mod burn through juice at a slower rate using the Variable Temperature (VT) system. This works with many different e-juices as their research has proven. The VT system helps burn less juice while also extending battery life.
eVic VTC Mini 60W Mod Features Include:
- Built by Joyetech
- Requires a single 18650 battery (sold separately)
- 60 watts of power
- Large OLED screen
- Operating voltage: 0.5V-8V
- Mini USB Charger
- eGo One Mega VT Tank has 4ml juice capacity
- Reads resistance down to 0.05 for temp control
- Reads resistance down to 0.15 for variable wattage mode
- Temperature range in Fahrenheit: 200F – 600F
- Titanium coils can be used with this mod – VT-Ti
- Nickel and Kanthal coils can be used as well (VT-Ni, VW mod)
See what JH Vapes has to say about this mod:
Cyan, Black, White