ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

Eleaf iStick Pico Resin Kit

Eleaf iStick Pico Resin Kit

Eleaf iStick Pico Resin Kit


3.67 out of 5
3 Reviews
All in stock items ship within 24 hours (excluding weekends and holidays).

Rated 3.67 out of 5 based on 3 customer ratings
(2 customer reviews)

The Eleaf iStick Pico Resin Kit takes everything you like about the tiny iStick Pico and adds a layer of high-end materials to it. Made to simulate a stabilized wood, high-end mod, the Pico gets awfully close for a fraction of the price.

Please note: Color variations are as follows. The primary color is the first in the variation – the mostly dominant color. The secondary color follows, and is found a little less in each mod.

We did the best we could here as they are all difference swirled together. Without breaking the plastic we cannot examine the backside of the mod. We cannot accept returns based on color selection as it is impossible to name the color in the finish with accuracy.

In stock and ready to ship! Not a preorder!

Clear selection

Save on Eleaf Melo 3 coil heads!

Save on Complex Coils and Wire

Save on Wick

SKU: 997861 Category: Tags: , , , , , , , , , , , , , ,

With The Eleaf iStick Pico Resin Kit in your hand, you will feel like a boss.

The Eleaf iStick Pico Resin Kit includes the iStick Pico Resin battery body and the Eleaf Melo 3 mini atomizer.

The first thing you will notice with this little device in your hand is the finish. The resin colors are not only eye-popping, the finish can also take small scratches like a champ. You won’t have to worry too much about ruining the finish – it is pretty durable! The top and bottom are crafted from stainless steel for a nice, reliable finish you can put down anywhere.

Each order includes an iStick Pico Resin mod, Eleaf Melo 3 atomizer, two pre-built coil heads, replacement o-rings, an a USB cable.

The coils for use with the Melo 3 offer two variations: 0.5 and 0.3 ohm resistances.

Features include:

  • 3 month warranty from Eleaf
  • Firmware upgradeable
  • Spring-loaded 510 connector
  • Hidden airflow control on Melo 3
  • Top-fill atomizer
  • Requires a single 18650 battery (sold separately)
  • TC ready
  • Beautiful body-molded resin finish mimics stabilized wood mods
  • Size: 45mm*23mm*115mm
  • Thread type: 510 thread
  • E-liquid capacity: 2ml
  • Cell type: High-rate 18650 cell (required)
    • (Continuous discharge current should be above 25A)
  • Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
  • Output wattage: 1-75W
  • Resistance range: 0.05-1.5ohm (TC modes)
  • Resistance range: 0.1-3.5ohm (VW/Bypass mode)

Please take extra care with your 18650 cells – please make sure to know battery safety when dealing with lithium ion cells.

Additional information

Weight 8 oz
Primary Color

Orange, Red/Purple, Red/Green, Green, Blue, Purple

Share your thoughts!

3.67 out of 5 stars

2 reviews

Let us know what you think...

What others are saying

  1. Charlie Chung

    1 out of 5 Great little single 18650 mod but...extremely disappointed in the Resin color

    Primary color selected: Green
    GrimGreen posted a instagram photo of this mod that was delivered by OriginVape and I was amazed at how great it looked. I checked out their website to take a look at the photos and it was identical (Green with a little silver and black). I’m might’ve just gotten a bad batch or something but when the device was delivered I was extremely disappointed with the color. It came with green with bits of blue, purple, and orange ( i can’t find those color combination in any of the photos)…It looks terrible (picture below) I haven’t had time to contact OriginVape but this buy has been a complete bust for me to say the least and I don’t know if they’ll even give me a refund or exchange.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. theankh

    5 out of 5 Better in person than shown in photos.

    This is my 3rd pico device, so I know the mod. It’s exactly what I was hoping for. It’s a little pico in sexy red/blue/purple swirled resin. The resin is super silky to the touch. It’s quite stunning and vivid looking in real life. Thank you Origin Vape for allowing us to select our primary colors for this device. Perfect transaction. I will be back.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. bilal.hamzeh

    I’m typically not one to write reviews, but the service I received from Origin Vape was outstanding. I ordered on a Friday and received my Pico kit on Monday. The color of the mod itself was exactly what I wanted, and the fact that Origin Vape has the option of selecting primary/secondary colors is great, as all other vendors of this mod do not.
    I am an experienced vaper and used mostly dual or triple 18650 devices, but wanted something smaller. This device puts out just as much power and has better temp control accuracy than many other mods I have owned. I would give this kit a 11/10 rating.
    The only potential downside is that it fits an atomizer with a max diameter of ~22mm, but I purchased a heatsink for a few dollars, and now can use all of my 24mm+ atomizers on it without a problem. Battery life is great, bypass and temp control modes are outstanding, and 75w output for a single 18650 mod is more than I could expect.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...




Continue as a Guest

Don't have an account? Sign Up