FREE SHIPPING TO USA FOR ALL ORDERS OVER $50 | ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)
FREE U.S. SHIPPING ON ALL ORDERS OVER $50
ALL IN STOCK ITEMS SHIP IN 24 HRS (except weekends/holidays)

EHPro Nixon RDA

EHPro Nixon RDA

EHPro Nixon RDA

$29.99 $19.99

4.50 out of 5
4 Reviews
All in stock items ship within 24 hours (excluding weekends and holidays).

Rated 4.50 out of 5 based on 4 customer ratings
(4 customer reviews)

The Nixon RDA by EHPro has a cutoff valve to prevent leaking, and it comes with a Delrin drip tip/top cap combo and a metal top cap and drip tip. Awesome!

Clear selection

Save on Wire

Save on Wick

Save on Pre-Built Coils

Save on Complex Coils and Wire

Save on Wick

SKU: 40504 Category: Tags: , , , , , , ,
0000

The EHPro Nixon RDA is an innovate new four post RDA that shows a lot of promise. This atomizer regulates airflow underneath the coils. There is a valve that cuts off the airflow and thus prevents leaking. The built quality is great, and EHPro is known for their quality control. A metal drip tip with two o-rings come with the RDA, and the metal top cap has cooling fins built in.

This dripper also comes with a one-piece Delrin top cap and drip tip. The drip well is quite deep, 6mm high. PEEK insulation prevents shorts for the positive double-post. The negative posts are milled onto the deck. The screws are Phillips heads and the post holes can accommodate wire up to 20 gauge. Each rebuildable is uniquely serialized and has the “I am not a clone” lettering on the bottom.

A great bottom-airflow dripper from EHPro! Included with each order is one Nixon RDA, a Delrin top cap/drip tip combo, 510 steel drip tip, mini screwdriver, Koh Gen Do cotton, two pre-built Kanthal coils, and replacement o-rings and screws. Imported.

EHPro Nixon RDA Features Include:

  • Built by EHPro
  • Not a clone!
  • Uniquely Serialized
  • Airflow routed underneath the coils
  • Airflow can be fully cut off via a valve
  • Copper adjustable 510 pin
  • Four post deck
  • 6mm drip well
  • Delrin top cap/drip tip combo
  • 510 drip tip included
  • Koh Gen do pad included
  • Cooling fins on top cap
  • 22mm diameter
  • Negative posts milled onto deck
  • PEEK insulator for positive post

 

Please exercise caution when using a rebuildable atomizer. Electronics knowledge is necessary. Rebuildable atomizers are for experts only. Origin Vape LLC, its employees and affiliates absolve themselves of all responsibility with regard to improper usage. Use at your own risk.

Additional information

Weight 4 oz
Manufacturer

Color

Black, SS

Share your thoughts!

4.5 out of 5 stars

4 reviews

Let us know what you think...

What others are saying

  1. Luc

    4 out of 5 Flavor, leak protection, and a well-stocked package

    I bought this because Eric knows I’ll buy anything he lists that has under coil airflow.

    The build I popped in there is a 24 gauge 5/6 wrap dual coil, sitting on my SMPL mod. It has a protruding 510 that is long enough to be used on hybrid mods, which is a huge plus.

    The airflow on this RDA is my only complaint, and it’s only a small complaint. The airflow all the way open is still a bit restricted, and it’s hard to fine-tune a specific airflow “setting” if you’re trying to close it off.

    That being said, the flavor off this atty is as good as to be expected with a bottom-airflow RDA – which is to say the flavor is excellent.

    The leak-prevention system seems to work, as I’ve had no issues thusfar regarding juice leaking.

    The 4-post deck is pretty easy to build on, and you don’t need to center your coils which is kinda cool.

    The well is absurdly deep, and will keep your wick wet for a good long while at any reasonable temperature (I like a hot vape and I still get a good 30+ hits before re-dripping).

    If you were a fan of the Holmes, and didn’t use it on the widest setting, you’ll certainly love this. If you weren’t a fan of the holmes – what’s wrong with you? Try this anyways, it’s great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Brian

    4 out of 5 Outstanding bottom air RDA.

    Fit and finish is excellent. Flavor is great as expected for bottom air.

    Airflow cutoff works perfectly.

    All in all my new favorite bottom airflow rda by far.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Hank

    5 out of 5 AMAZING!!

    It crazy how a very inexpensive RDA can put all of my high end, expensive authentics on the shelf! Since receiving this rda I just cant stop using it! Awesome flavor, perfect airflow! works like a chamo! Right now it is my favorite RDA!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Rhonda

    5 out of 5 I'm loving it

    I’m loving the bottom airflow design, you twist it a bit and drip and don’t have to worry about leaking, then twist again the other way and MMmm great flavor and vapor production.
    Great service and quick shipping

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. David

    Question

    How big are the post holes? I want to use a stapled Helix build on this.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up