Carbon Fiber Freakshow V2 RDA
Carbon Fiber Freakshow V2 RDA version two comes with three top caps, a brass barrel, and three airflow slots for single or dual coil setups!
Out of stock
The Carbon Fiber Freakshow V2 Rda is a unique and original dripper made by Wotofo. Version two features three airflow slots for single or dual coil setups, as well as three colored top caps and a brass barrel! Airflow is routed from under the coils and the adjustable air slots are under the deck. Comes with one dripper. Allen key, o-rings and replacement screws. Imported.
Wotofo’s original design, the Carbon Fiber Freakshow V2 RDA is not a clone. With three huge airflow slots and a cavernous drip well, this RDA can blow serious clouds. Airflow is directed from under the coils and is adjustable, capable of single or dual coil airflow options.
Carbon Fiber Freakshow V2 RDA Features include:
- Carbon fiber wrapped
- 22mm diameter
- Machine post screws for durability
- Brass barrel interior
- Three huge adjustable airflow slots
- Three top caps
- Stainless Steel
- Airflow is directed from under coils
- Uniquely serialized
- Not a clone
- Very deep juice well
- Three piece design
- Three post deck with huge lead holes
Due to the nature of rebuildable atomizers there is no warranty. These product are intended for experienced users only and require technical knowledge in order to properly use it. Youtube has many video tutorials on how to build these units properly and Originvape.com, its employees and affiliates absolve themselves of all responsibility if a user does not take caution when working with rebuildable atomizers.
The user of this atomizer requires that a user must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil, however some rebuildable atomizers are sold fully ready to be utilized, such as the IGO-W. Installation is required with this unit. Wick, wire, cotton, and mesh sold separately.
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no ohm meter or knowledge of how to use an ohm meter, or when an ohm meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without working knowledge of electronics.
This is due to the fact that:
1. A rebuildable coil/wick MUST be tested carefully with an ohm meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices and can cause batteries to vent and possibly explode. Be sure you are using the correct batteries with a mechanical mod and a rebuildable atomizer, such as a high drain IMR battery like the 18650 Efest 35A 2500mAh batteries we sell on the site.
4. New coils should ideally be tested and then used first without wicks to ensure that they fire up and do not cause a short. This also helps burn off kanthal machine oil used during manufacture that helps with flavor. This is called “dry burning” and is an important element in building a dripper.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.